HobbyKing
MYSTERY 12A BRUSHLESS SPEED CONTROLLER (BLUE SERIES)
| Amp rating | 12A |
| (10sec) | 16A |
| BEC Output | 5.0V / 1A |
| Dimensions | 22x21x4mm |
| PWM frequency | 8Khz/16Khz |
| This ESC is also sold as | HobbyKing BlueSeries. |
Voltage:, 7.4-11.1V (2-3 cell Lipo/5-10 NiCd), Weight:8g, Main Functions:, Safety mode:, the motor wont start no matter what the position of the control stick is when switch on the RC unit., Brake setting:, On/Off (factory default is off), Low current protection:, Ignore/Reduce power/Shut off, Temperature protection:, Reduce power when temperature reaches 120C,
Spec. Burst Rate Three point battery type and low voltage ...5 Reviews
HobbyKing
TURNIGY 2836 BRUSHLESS 450-SIZE HELI MOTOR 3700KV
| Bolt holes | 15mm & 19mm |
| Diameter of shaft | F3.17mm |
| Length of front shaft | F14mm |
| Magnet type | 45SH |
| Voltage | 3-4S |
| Current | 30A |
| Power | 700W |
Dimension:, 28mm x 38mm, 53mm(with shaft), Weight:, 70g (kv3700) (not including connectors), Bolt thread:M3, Lamination thickness: ., Max performance:, Prop:**, Included Accessories:, 1 x 13t and 1 x 11t pinion,
2mm For 450 size Helicopter 3 x Male and 3 ...5 Reviews
HobbyKing
HK2627 EDF OUTRUNNER 4300KV FOR 64MM
| Specs | Kv- |
| Dimensions | 46 x 26mm |
| Shaft diameter | 3.0mm |
| Shaft length | 10mm |
| Voltage | 11.1V |
| Weight | 52g (1.83oz.) |
| Output Power | 280w |
| Max current(<60s) | 36A |
| RPM/V | 4300 |
| Thrust | 700g(24.7oz.) |
| Recommended model weight | 400-750g |
| Recommended model fans | 64mm Fans |
| Mounting Hole Bolt Circle | 18mm |
| Mtg. Hole Number & Size | 4 x M2 |
5 Reviews
HobbyKing
TURNIGY 3639 BRUSHLESS MOTOR 750KV
| Diameter of shaft | 5mm |
| Length of front shaft | 18.8mm |
| Magnet type | 45SH |
| Voltage | 2-3S |
| Max current | 30~35A |
| Prop | 12x8~14x10 |
| Thrust | 1800~2000g |
| Power | 600W |
| Download data files | TURNIGY MOTOR DATA |
Dimension:, 37mm x 42mm, 62mm(with shaft), Weight:, 136g (kv750) (not including connectors), Lamination thickness: .,
2mm Max performance For 1500~2000g 3D model airplane.5 Reviews
HobbyKing
EDF70 WITH 3800KV MOTOR ASSEMBLED
| Motor | C20pro 3800kv |
| Current | 29.6A |
| Thrust | 24.8oz |
| Power | 296W |
| Current | 34A |
| Thrust | 28.9oz |
| Power | 377.4W |
| Current | 39A |
| Thrust | 33.3oz |
| Power | 491.4W |
5 Reviews
HobbyKing
FRSKY V8R7-II 2.4GHZ 7CH RECEIVER
| Operating voltage | 3.0~16V |
| Power consumption | 30mA |
| Resolution | 3072 |
| Latency | 22ms |
| Range | 1.5km-2.5km |
| Dimensions | 33.5 x 22 x 12 mm |
| Weight | 5.5g |
Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Receiver Specification:, Number of channels: 7,
FrSKY ACCST technology is proven, approved by many model associations, ...5 Reviews
HobbyKing
MIRAGE 4000 FIGHTER W/ BRUSHLESS EDF & RETRACTS PLUG-N-FLY
Highly scaled aerobatic fighter jet EDF Plug-n-fly.The Mirage-4000 EDF jet comes 97% pre-built and includes a powerful 45A brushless EDF system and retractable landing gear. Specification: Wingspan: 785mm Length: 1230mm Height: 345mm Flying Weight: 940g Channel: 6ch Motor: 2600kv Brushless Outrunner ESC: 45A Servo: 7 x 9g EDF: 70mm Required: Your own Tx & Rx Battery 2200mah 14.8V 4S 20C,
5 Reviews
HobbyKing
GENUINE IMAX B8PLUS CHARGER/DISCHARGER 1-8 CELLS
| Operating voltage range | 10.0~18.0Volt |
| Circuit power | max. 150W |
| Charge current range | 0.1~7.0A |
| Discharge current range | 0.1~5.0A |
| Current drain for balancing Li-Po | 300mAh/cell |
| NiCd/NiMH battery cell count | 1~27 cells |
| Lithium bettery cell count | 1~8 Series |
| Pb battery voltage | 2 to 36V |
| Weight | 480g |
| Dimensions | 163.8X106.2X45.6mm |
| USB | Yes |
| Temp Prop port | Yes |
5 Reviews
HobbyKing
TURNIGY2836 BRUSHLESS OUTRUNNER 1000KV
| Diameter of shaft | 4mm |
| Length of front shaft | 14mm |
| Magnet type | 45SH |
| Prop | EP10x5 |
| Thrust | 1000g |
| Power | 300W |
Dimension:, 28mm x 37mm, 55mm(with shaft), Weight:, 80g (kv1000) (not including connectors), Lamination thickness: ., Voltage:3S,
2mm Max performance For 800-1000g 3D 1200g+ Trainer5 Reviews
HobbyKing
2.4GHZ 100MW TX/RX & 1/3-INCH CCD CAMERA NTSC
| CCD sensor type | 1/3 color SONY CCD |
| NTSC | 510(H)*492(V) |
| PAL | 500(H)*582(V) |
| Scanning system | Interlaced scanning |
| Synchronization | System |
| Horizontal resolution | 420TV line |
| DSP+CCD | CXD3142R+405AK |
| S/N Ratio | 48dB |
| Gamma Modification | 0.45 |
| White balance | Auto |
| Auto backlight compensation | Auto |
| Lens | 3.6MM |
| Input voltage | 9~12.6V |
| Electronic Shutter | 1/50 (60) ~ 1/100,000s |
| Video output | 1.0VP-P composite video |
| Operation Temp. | -20~50 |
| Size | 38*38mm |
| Flight time | Approx 60min/100mah 3S |
| Channel | 4-Ch, AV synchronization |
| Power | 100mW |
| Input voltage | 8~12V |
| Weight | 29.9g |
| Size | 41x28x16mm |
| Frequency | 2.4G 2.410G/2.430G/2.450G/2.470G |
Audio: No,
12 Channel Tx/Rx video system with CCD camera. The camera ...5 Reviews
HobbyKing
C2020 MICRO BRUSHLESS OUTRUNNER 3500KV (11G)
| Diameter | 20.2mm |
| Length | 20mm |
| Shaft | 5mm |
| Weight | 11g (with 10cm wire) |
| Power | 60W |
| Resistance | 262 |
| Idle Current | .3A |
| Max amp | 10A (15sec burst) |
| Voltage | 2-4cell Lipoly |
Kv: 3500rpm/v, Turns: 25,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
TURNIGY MACH2 13.5T BRUSHLESS R/C CAR MOTOR W/TIMING ADJUST 3500KV
| Weight | 204g |
| Diameter of shaft | 3.17mm |
| Length of front shaft | 15mm |
| Power | 205W+ |
Specifications:, Dimension:, 53mm x 36mm(43mm w/Batt-terminal) , 70mm(with shaft), Kv:3500rpm/v, Cells:, 4-7NiMh / 2-3S Lipoly,
Turnigy Mach2 Brushless R/C Car Motor w/timing adjust. This brushless ...5 Reviews
HobbyKing
TURNIGY2836 BRUSHLESS OUTRUNNER 2350KV
| Magnet type | 45SH |
| Voltage | 3-4S Lipoly |
| Prop | APC4.7x4.25 |
| Thrust | 800g |
| Power | 480W |
Dimension:, 28mm x 40mm, 56mm(with shaft), Weight:, 79g (kv2350) (not including connectors), Diameter of shaft:��, Length of front shaft:��, Lamination thickness: .,
F4.0mm F15mm 2mm Max performance;5 Reviews
HobbyKing
GWS PG-02 PIEZO GYRO/JR
| Dimension | 28.5 x 26.5 x 11mm |
| Power supply | 4.8~6V |
| Current drain | 30mA (At 4.8V) |
| Operating temperature | -5~+50C |
Specification:, Weight:, 11g(Gyro only) 13g (with gyro mount), Gain adjustment:, Dual-Gain (Remote control), Applicable R/C systems:, Futaba, JR, Hi-Tec, Sanwa/Airtronics Multiplex, GWS,
5 Reviews
HobbyKing
RCG 26CC GAS ENGINE W/ CD-IGNITION 2.6HP/1.95KW
| Displacement | 26cc |
| Weight | 1122g |
| Carburettor | (Japanese Walbro) Diaphragm & Butterfly valve. |
| Prop Speed | 1500 ~ 8000rpm |
| Max power | Over 1.95kw |
| Suggested prop | 18x8 7100rpm (standard two leafs prop) |
| Ignition | DC-CDI (computer controlled auto advance electric ignition system) |
| Lubrication oil | 2 cycle engine oil |
| Bore/Stroke | 34mm x 28.6mm |
Mixture: 25:1 to 40:1,
With its easy starting characteristics and reliable low-maintenance running the ...5 Reviews